FILTERS
Clear all
Category
Technical characteristics
-
YesVersion as main switch
-
YesVersion as maintenance-/service switch
-
YesVersion as safety switch
-
YesVersion as emergency stop installation
-
NoVersion as reversing switch
-
220-690Rated operating voltage
-
1Number of auxiliary contacts as change-over contact
-
690Max. rated operation voltage Ue AC
-
Screw connectionType of electrical connection of main circuit
-
160Rated permanent current Iu
-
250Rated permanent current Iu
-
160Rated permanent current at AC-21, 400 V
-
250Rated permanent current at AC-21, 400 V
-
ToggleType of control element
-
Built-in device fixed built-in techniqueDevice construction
-
1.7Conditioned rated short-circuit current Iq
-
64Rated operation power at AC-23, 400 V
-
100Rated operation power at AC-23, 400 V
-
1.7Rated short-time withstand current lcw
-
1Number of auxiliary contacts as normally open contact
-
4Number of poles
-
3Number of poles
-
1Number of auxiliary contacts as normally closed contact
-
YesMotor drive optional
-
NoMotor drive integrated
-
YesVoltage release optional
-
YesSuitable for floor mounting
-
NoSuitable for front mounting 4-hole
-
NoSuitable for front mounting centre
-
YesSuitable for distribution board installation
-
NoSuitable for intermediate mounting
-
GreyColour control element
-
YesInterlockable
-
IP30Degree of protection (IP), front side
LEGRAND
DPX -IS 250
REF. 420198
DPX³-I 160 trip-free switch, 3 poles, with rated current of 160A
You can only compare 4 products, you must remove 1 to add this one
LEGRAND
DPX -IS 250
REF. 420199
DPX³-I 160 trip-free switch, 4 poles, with rated current of 160A
You can only compare 4 products, you must remove 1 to add this one
LEGRAND
DPX -IS 250
REF. 420299
DPX³-I 250 trip-free switch, 3 poles, with rated current of 250A
You can only compare 4 products, you must remove 1 to add this one
LEGRAND
DPX -IS 630
REF. 420300
DPX³-I 250 trip-free switch, 4 poles, with rated current of 250A
You can only compare 4 products, you must remove 1 to add this one