Metal back box for installation of floor boxes and ducts

Name: Metal back box for installation of floor boxes and ducts
SKU: 089634

Mosaic™ LEGRAND

REF. 089634 EAN. 3245060896348

Compare You can only compare 4 products, you must remove 1 to add this one

Height adjustable (its height must be equal to the height of the screed) using 4 screws located in the box corners and a tool adapting to electric drill or screwdriver
For coating thickness (tile, marble) between 6 and 28 mm
Back boxes made in galvanised steel (Z275) and Zamak
Delivered with worksite protection cover to be replaced by adaptor Ref. 0 896 83 or 0 896 84

For installation in concrete floor only - Temperature of use, transport and storage: -5° à +60°

Allows the derivation of strong or low currents and / or the installation of floor boxes: - reduced height 65 mm - adjustable height from 65 to 105mm

Nominal dimension	480 mm
Min. height finishing layer	50 mm
Levelling range	56-140 mm
Suitable for subfloor duct countersunk (closed)	Yes
Suitable for subfloor duct overhead closed	No
Duct height	28-48 mm
Duct width	50-350 mm

Built-in opening for floor column	No
Built-in opening for built-in unit	Square
Material side wall	Steel
Suitable for placing of sealing	Yes
Decoupling possibility cover from base unit	Yes
Bottom plate	Yes