AFDD DX3 STOP ARC 10000A 1 pole + neutral 10A curve C 30MA TYPE A

Name: AFDD DX3 STOP ARC 10000A 1 pole + neutral 10A curve C 30MA TYPE A
SKU: 415965

DX³ LEGRAND

REF. 415965 EAN. 3414971179608

Compare You can only compare 4 products, you must remove 1 to add this one

Breaking capacity 10000A according to IEC 61009 - 1 standard for household installations. Tripping threshold in case of short - circuit between 50A and 100A (C curve between 5 In and 10 In). Detection of type A leakage current. Sensitivity 30 mA
Line connection on bottom side by screw terminals, with dedicated prong or fork busbar, 16 mm² solid copper cables or 10 mm² stranded copper cables with lugs. Load connection on top side by screw terminals, with 16 mm² solid copper cables or 10 mm² stranded copper cables with lugs.
Protected against solid bodies larger than 12,5mm ("fingerproof") : IP20 according to IEC/EN 60529 standard. Maximum level of limitation of the let through energy (energy limitation class 3 according to IEC 61009 - 1 standard).
Can be equipped with Legrand DX3 auxiliaries : auxiliary contacts, shunt trip, overvoltage release, power overvoltage protection (POP).
This device complies with substance-restriction requirements and has been designed in an environmentally conscious process.

Recommended for 2P+E power sockets circuit protection in sleeping accommodation, premises constituting a fire risk due to the types of material processed or stored therein (barns, woodworking shops, paper mills, etc), premises constructed with combustible building materials (wooden buildings and houses), structures where fire spreads easily (tower blocks) and premises where irreplaceable goods might be in danger. In residential installations, they should ideally be installed on the bedroom and living room circuits. In the case of total refurbishment, they should play an active part in making the installation safe.

Fitted with two DIN rail clamps, one top side and one bottom side, allowing an independent removal of this product when the prong busbar supplying the row is still in place.

Fitted with a LED indicator allowing the identification of the status of the breaker. Mechanical indicator for identification of tripping due to arc fault. Fitted with a label holder allowing a clear, visible and convenient identification of the circuit. On and OFF indication printed on the handle respectively on red and green backgrounds for an easy identification of the status of the MCB.

Number of poles	2
Rated voltage	230 V
Rated current	10 A
Rated fault current	0.03 A
Leakage current type	A
Current limiting class	3
Rated short-circuit breaking capacity according to EN 61009	10 kA
Frequency	50 Hz
Release characteristic	C
Concurrently switching neutral conductor	Yes
Over voltage category	3
Pollution degree	2
Width in number of modular spacings	3
Additional equipment attached at delivery	Other
Control voltage type auxiliary equipment	AC
Degree of protection (IP)	IP20
Width	54 mm

Height	96.2 mm
Depth	77.6 mm
Degree of impact strength (IK)	IK02
Operating / setting temperature	-25-40 °C
Storage temperature	-25-70 °C
Nominal voltage	180-264 V
Electric supplying direction	From the bottom
Terminal marking indication	Yes
Colour	Grey
RAL-number	7035
Halogen free	Yes
Connection type	Screwed terminal , Busbar and cable
Terminals capacity	1.5-16 mm²
Cable nature for connection	Flexible or rigid
Label space/information surface	Yes
Mounting method	DIN rail