Logo print

Accessories | Legrand Malaysia

FILTERS
Clear all
Category
Technical characteristics
  • Suitable for max. current main contact unit
    125
  • Rated switch current
    6
  • Rated voltage
    230
  • Rated voltage
    240
  • Overall height
    83
  • Overall height
    84.5
  • Suitable for max. current main contact unit
    63
  • Suitable for max. current main contact unit
    16
  • Depth
    71.5
  • Depth
    74.3
  • Depth
    77.7
  • Rated voltage
    48
  • Rated switch current
    5
  • Width
    8.8
  • Rated switch current
    0.2
  • Width
    9
  • Width
    11
  • Rated voltage
    250
  • Depth
    67
  • Width
    70.9
  • Width
    34.9
  • Overall height
    98.8
  • Width
    20
  • Overall height
    115
  • Width
    17.8
  • Depth
    66
  • Width
    17.7
  • Rated voltage
    415
  • Width
    52.4
  • Overall height
    98.7
  • Suitable for max. current main contact unit
    25
  • Overall height
    95.9
  • Supply voltage AC 50 Hz
    100-240
  • Supply voltage AC 60 Hz
    100-240
  • Depth
    71
  • Time delay at signal exchange
    200-300
  • Input current at signal 1
    0.5
  • Permitted voltage at input
    0-240
  • Permitted voltage at output
    5-250
  • Device fitting
    Universal
  • Number of contacts as change-over contact
    0
  • Number of contacts as change-over contact
    1
  • Device fitting
    Auxiliary switch/relay
  • Function
    Auxiliary switch/fault-signal switch
  • Function
    Remote drive
  • Function
    Auxiliary switch
  • Function
    Remote turn-on switch
  • Type of accessory/spare part
    Other
  • Function
    Shunt release (for power circuit breaker)
  • Function
    Under voltage coil
  • Device fitting
    Earth leakage switch
  • Function
    Monitoring unit with automatic reclosing
  • Function
    Signalling switch
  • Number of contacts as change-over contact
    2
  • Type of accessory/spare part
    Mounting clip
  • Voltage type of supply voltage
    AC
  • Type of accessory/spare part
    Bluetooth interface
  • Type of accessory/spare part
    Cover
  • Type of accessory/spare part
    Module frame
  • Type of accessory/spare part
    Distance holder
  • Number of contacts as normally open contact
    0
  • Number of contacts as normally open contact
    1
  • Number of contacts as normally closed contact
    0
  • Number of contacts as normally closed contact
    1
  • Number of fault-signal switches
    0
  • Number of HW-interfaces industrial Ethernet
    0
  • Type of electric connection
    Screw connection
  • Number of interfaces PROFINET
    0
  • Digital inputs configurable
    No
  • Width in number of modular spacings
    0.5
  • Width in number of modular spacings
    1
  • Width in number of modular spacings
    2
  • Number of HW-interfaces RS-232
    0
  • Digital outputs configurable
    No
  • Number of HW-interfaces RS-422
    0
  • Number of digital inputs
    1
  • Number of HW-interfaces RS-485
    0
  • With auto test for earth leakage function
    No
  • Number of HW-interfaces serial TTY
    0
  • With auto test for earth leakage function
    Yes
  • Number of digital outputs
    1
  • Suitable for max. number of poles main contact unit (total)
    4
  • Suitable for max. number of poles main contact unit (total)
    2
  • Number of HW-interfaces USB
    0
  • Suitable for safety functions
    No
  • Type of digital output
    Relay
  • Supporting protocol for CAN
    No
  • Number of HW-interfaces parallel
    0
  • Supporting protocol for MODBUS
    No
  • Type of voltage (input voltage)
    AC
  • Number of HW-interfaces Wireless
    1
  • Number of HW-interfaces other
    0
  • Type of output voltage
    AC/DC
  • Short-circuit protection, outputs available
    No
  • With optical interface
    No
  • Supporting protocol for TCP/IP
    No
  • Supporting protocol for INTERBUS
    No
  • Supporting protocol for ASI
    No
  • Supporting protocol for KNX
    No
  • Rail mounting possible
    Yes
  • Supporting protocol for Data-Highway
    No
  • Supporting protocol for DeviceNet
    No
  • Supporting protocol for SUCONET
    No
  • Supporting protocol for LON
    No
  • Supporting protocol for PROFINET CBA
    No
  • Supporting protocol for SERCOS
    No
  • Supporting protocol for Foundation Fieldbus
    No
  • Supporting protocol for EtherNet/IP
    No
  • Supporting protocol for AS-Interface Safety at Work
    No
  • SIL according to IEC 61508
    None
  • Supporting protocol for DeviceNet Safety
    No
  • Performance level according to EN ISO 13849-1
    None
  • Supporting protocol for INTERBUS-Safety
    No
  • Explosion safety category for gas
    None
  • Supporting protocol for PROFIsafe
    No
  • Explosion safety category for dust
    None
  • Supporting protocol for SafetyBUS p
    No
  • Radio standard Bluetooth
    No
  • Radio standard Wi-Fi 802.11
    No
  • Radio standard GPRS
    No
  • Radio standard GSM
    No
  • Radio standard UMTS
    No
  • IO link master
    No
  • Supporting protocol for PROFIBUS
    No
  • System accessory
    No
  • Appendant operation agent (Ex ia)
    No
  • Supporting protocol for PROFINET IO
    No
  • Appendant operation agent (Ex ib)
    No
  • Supporting protocol for other bus systems
    No
  • Fieldbus connection over separate bus coupler possible
    No
  • Front built-in possible
    No
  • Rack-assembly possible
    No
  • Wall mounting/direct mounting
    No
  • Degree of protection (IP)
    IP3X
  • Voltage type
    AC/DC
  • Voltage type
    AC
  • Contains Batteries and/or Accumulator
    Yes
  • Regulation Type (Pack1)
    P : Portable (Standard format)
  • Battery ou Accumulator (Pack1)
    Battery (not rechargeable)
  • Element Composition (Pack1)
    Lithium (battery or accumulator)
  • Single Element weight (Pack1)
    3.3
  • IEC code (Pack1)
    CR2032
  • Number of Pack 1
    1
  • Pack1 Location
    Product includes a battery
  • Number of Single Element (Pack1)
    1
title
Legrand
REF. 412951

[B2B-EN]-Osmoz adaptor - for mounting Ø 22.5 mm units on Cat.No 4 129 50
246,69

You can only compare 4 products, you must remove 1 to add this one
title
Legrand DX3
REF. 412950

[B2B-EN]-Special modular support for rail - Arteor/Mosaic 2-modules mechanisms - 2.5 modules
1 127,72 / 7 m

You can only compare 4 products, you must remove 1 to add this one
title
Legrand
REF. 412952

[B2B-EN]-Blanking plate - for mounting equipment on Cat.No 4 129 50
976,35 / 2 piece

You can only compare 4 products, you must remove 1 to add this one
title
LEGRAND
REF. 406304

Sealable screw cover for MCB-DX³ - 4 separable poles - 1 module per pole
You can only compare 4 products, you must remove 1 to add this one
title
Legrand DX3
REF. 406307

Spacing unit - DX3
You can only compare 4 products, you must remove 1 to add this one
title
LEGRAND DX³
REF. 406314

Manual transfer switch DX³ - for 2 poles - 2-modules devices
You can only compare 4 products, you must remove 1 to add this one
title
LEGRAND DX³
REF. 406315

Manual transfer switch DX³ - for 3 poles - 3-modules devices
You can only compare 4 products, you must remove 1 to add this one
title
Legrand DX3
REF. 406316

Manual transfer switch DX³ - for 4 poles - 4-modules devices
You can only compare 4 products, you must remove 1 to add this one
title
LEGRAND DX³
REF. 406258

Auxiliary changeover switch DX³ - 6A 250V AC - 0,5 module
You can only compare 4 products, you must remove 1 to add this one
title
LEGRAND DX³
REF. 406260

Fault signalling changeover switch DX³ - 6A 250 V AC - 0.5 module
You can only compare 4 products, you must remove 1 to add this one
title
LEGRAND
REF. 406262

Auxiliary changeover switch DX³ - 6 A 250 V~ - exchangeable - 0.5 module
You can only compare 4 products, you must remove 1 to add this one
title
LEGRAND DX³
REF. 406266

Auxiliary + fault signalling changeover switch DX³ - 6A 250V AC - 1 module
You can only compare 4 products, you must remove 1 to add this one
title
LEGRAND DX³
REF. 406276

Current shunt trip DX³ - 12 to 48 V AC and DC
You can only compare 4 products, you must remove 1 to add this one
title
LEGRAND DX³
REF. 406278

Current shunt trip DX³ - 110 to 415 V AC
You can only compare 4 products, you must remove 1 to add this one
title
LEGRAND DX³
REF. 406280

Undervoltage release DX³ 12 to 48 V AC and DC - time delay adjustable from 0 to 300 ms
You can only compare 4 products, you must remove 1 to add this one
title
LEGRAND DX³
REF. 406282

Undervoltage release DX³ 230V AC - time delay adjustable from 0 to 300 ms
You can only compare 4 products, you must remove 1 to add this one
title
Legrand DX3
REF. 406288

Stop and go automatic resetting for DX³ - 230 V~ - standard - 2 mod.
You can only compare 4 products, you must remove 1 to add this one
title
Legrand DX3
REF. 406289

Stop and go automatic resetting - DX³ - self test unit
You can only compare 4 products, you must remove 1 to add this one
title
Legrand DX3
REF. 406290

Motorized control DX3 24-48V for 1 module per pole devices up to 63A
You can only compare 4 products, you must remove 1 to add this one
title
Legrand DX3
REF. 406291

Motorized control DX3 230V for 1 module per pole devices up to 63A
You can only compare 4 products, you must remove 1 to add this one
title
Legrand DX3
REF. 406295

Motorized control DX3 230V with automatic resetting for 1 module per pole devices up to 63A
You can only compare 4 products, you must remove 1 to add this one
title
Legrand CX³
REF. 412429

[B2B-EN]-signalling auxiliary - for 1 module contactor 16 A to 25 A
1 281,86

You can only compare 4 products, you must remove 1 to add this one
title
Legrand CX³
REF. 412433

[B2B-EN]-Centralized control device - for latching relay 24 V~ to 48 V~ - 0.5 module
1 075,61 / 7 m

You can only compare 4 products, you must remove 1 to add this one
title
Legrand CX³
REF. 412434

Centralized control auxiliary for Legrand 230V~ standard pulse operated latching relay CX³
You can only compare 4 products, you must remove 1 to add this one