Auxiliary or Fault signalling contact DX³ - 6 A 250 V~ - 0.5 module

Name: Auxiliary or Fault signalling contact DX³ - 6 A 250 V~ - 0.5 module
SKU: 406256

LEGRAND

REF. 406256 EAN. 3245064062565

Compare You can only compare 4 products, you must remove 1 to add this one

Signalling, remote tripping auxiliaries and motorised controls DX³
Signalling auxiliaries fork busbar adapted - To fit on the Left - hand side of DX³ and TX³ devices - Maximum number of auxiliaries per device : - 3 signalling auxiliaries or - 2 signalling auxiliaries + 1 remote tripping auxiliary - Allow insertion of the supply busbar, top side - No tool required for joining together the auxiliary and the maIn =evice. - No tool required for joining together the auxiliary and the maIn =evice.Auxiliary contact - 6 A - 250 V~ (changeover switch) - For MCBs, RCBOs, RCCBs, isolating switch or remote trip isolating switch - Indicates the position of the contacts of its associated device - Fault signalling contact - 6 A - 250 V~ (changeover switch) - For MCBs, RCBOs, RCCBs - Allows the choice between the two functions - Number of modules : 0,5

Depth	71.5 mm
Device fitting	Universal
Function	Auxiliary switch/fault-signal switch
Width in number of modular spacings	0.5
Number of contacts as normally open contact	0
Number of contacts as normally closed contact	0

Number of contacts as change-over contact	1
Number of fault-signal switches	0
Voltage type	AC/DC
With auto test for earth leakage function	No
Suitable for max. number of poles main contact unit (total)	4