Logo print

title
title

AFDD DX3 STOP ARC 10000A 1 pole + neutral 13A curve C 30MA TYPE A

DX3 Legrand

AFDD DX3 STOP ARC 10000A 1 pole + neutral 13A curve C 30MA TYPE A

REF. 415966 EAN. 3414971169562
Download product sheet
You can only compare 4 products, you must remove 1 to add this one
Product charateristics
  • Breaking capacity 10000A according to IEC 61009-1 standard for household installations. Tripping threshold in case of short-circuit between 65A and 80A (C curve between 5 In and 10 In). Detection of type A leakage current. Sensitivity 30 mA
  • Line connection on bottom side by screw terminals, with dedicated prong or fork busbar, 16 mm² solid copper cables or 10 mm² stranded copper cables with lugs. Load connection on top side by screw terminals, with 16 mm² solid copper cables or 10 mm² stranded copper cables with lugs.
  • Protected against solid bodies larger than 12,5mm ("fingerproof"): IP20 according to IEC/EN 60529 standard. Maximum level of limitation of the let through energy (energy limitation class 3 according to IEC 61009-1 standard).
  • Can be equipped with Legrand DX3 auxiliaries : auxiliary contacts, shunt trip, overvoltage release, power overvoltage protection (POP).
  • This device complies with substance-restriction requirements and has been designed in an environmentally conscious process.
Recommendation / Restriction
  • Recommended for 2P+E power sockets circuit protection in sleeping accommodation, premises constituting a fire risk due to the types of material processed or stored therein (barns, woodworking shops, paper mills, etc), premises constructed with combustible building materials (wooden buildings and houses), structures where fire spreads easily (tower blocks) and premises where irreplaceable goods might be in danger. In residential installations, they should ideally be installed on the bedroom and living room circuits. In the case of total refurbishment, they should play an active part in making the installation safe.

The product's benefits

Installation
  • Fitted with two DIN rail clamps, one top side and one bottom side, allowing an independent removal of this product when the prong busbar supplying the row is still in place.
Usage
  • Fitted with a LED indicator allowing the identification of the status of the breaker. Mechanical indicator for identification of tripping due to arc fault. Fitted with a label holder allowing a clear, visible and convenient identification of the circuit. On and OFF indication printed on the handle respectively on red and green backgrounds for an easy identification of the status of the MCB.
Advantages
  • Daily automatic test of the arc fault detection function.

Technical characteristics

Rated fault current 0.03 A
Number of poles 2
Leakage current type A
Current limiting class 3
Release characteristic C
Concurrently switching neutral conductor Yes
Over voltage category 3
Pollution degree 2
Width in number of modular spacings 3
Additional equipment attached at delivery Other
Control voltage type auxiliary equipment AC
Degree of protection (IP) IP20
Degree of impact strength (IK) IK02
Electric supplying direction From the bottom
Terminal marking indication Yes
Colour Grey
RAL-number 7035
Halogen free TRUE
Connection type Screwed terminal , Busbar and cable
Cable nature for connection Flexible or rigid
Label space/information surface TRUE
Mounting method DIN rail